Цены на запчасти для водометных насадок из США
Цены на запчасти для водометных насадок из США
*Стоимость доставки необходимо уточнять отдельно | ||
Номер | Цена в США | Описание |
8,21 | 187,15 | Impeller 5 7/8 aluminum w/sleeve 36.1 & 2 tee keys 1705 |
8,23 | 187,15 | Impeller 6 1/8 aluminum w/sleeve 36.1 & 2 tee keys 1705 |
8,24 | 187,15 | Impeller 6 1/8 CB aluminum w/sleeve 36.1 & 2 tee keys 1705 |
9,41 | 132,53 | Bearing carrier with seals, A, (bearing not included) |
9,42 | 132,53 | Bearing carrier with seals, B, (bearing not included) |
12 | 2,85 | Reverse gate pivot - 2/unit |
14 | 3,04 | Grill rod/ea, large & medium - (2 required) |
16 | 3,33 | Grill bar/ea, medium - sold individually, 9 equals complete set |
17,31 | 138,99 | Driveshaft only A, 5/8 dia. shaft, 14 tooth, (see assy #46.41) |
17,32 | 138,99 | Driveshaft only B, 5/8 dia. shaft, 14 tooth, (see assy #46.42) |
21 | 0,29 | Shim washer, medium, small |
22 | 9,03 | Nut, driveshaft, drilled 5/8 |
22,1 | 7,41 | Nut, driveshaft, flat only, not drilled 5/8 |
23 | 11,21 | Shift rod only, A, B, (see assy #32) |
24 | 4,28 | Rod end |
25 | 8,84 | Shift lever, A |
26 | 4,75 | Shift lever, B |
27 | 1,71 | Shift lever spacer, B |
28 | 1,90 | Shift spring, A |
29 | 1,90 | Shift spring, B |
30 | 79,23 | Shift cable assy, AI tiller, short |
31 | 80,37 | Shift cable assy, AI tiller, long |
31,1 | 305,05 | Intake assy 5 7/8 with grill bars & liner - specify color |
31,2 | 305,05 | Intake assy 6 1/8 with grill bars & liner - specify color |
32 | 44,18 | Shift rod assy, complete with shift lever (specify A or B) |
36,1 | 2,28 | Shaft sleeve, impeller, 5/8 dia. Shaft (replaces part 36) |
37 | 4,18 | Rubber sleeve, reverse gate pivots - 2/unit |
40 | 2,38 | Sponge, collar |
41 | 4,09 | Shaft bearing thrust ring |
45 | 69,64 | Reverse gate only, A, B, Q, U (see assy #47) |
46,41 | 345,52 | Driveshaft assembled in bearing carrier A |
46,42 | 345,52 | Driveshaft assembled in bearing carrier B |
47 | 77,05 | Reverse gate assy, with pins & bushings, ABQU, gate 45 |
48 | 2,66 | Plug, water pump, B, 1968 & later |
49,41 | 570,57 | Main housing with exhaust tube A, no reverse gate |
49,42 | 570,57 | Main housing with exhaust tube B, no reverse gate |
54,41 | 161,60 | Bearing carrier with seals & studs, C, (bearing not included) |
54,42 | 161,60 | Bearing carrier with seals & straight/offset studs, EF |
56 | 177,46 | Driveshaft only C short, (see assy #90.41) |
57 | 177,46 | Driveshaft only EF short, (see assy #90.43) |
58 | 4,18 | Stud, mounting |
59 | 7,60 | Ring, water pump, C, E, F, prior to 1978 |
62 | 1,43 | Jam nut, 1/4-28 |
64 | 2,47 | Pivot, bellcrank (flanged bushing) |
71 | 5,70 | Stud, mounting, C - 2/unit |
78 | 20,14 | Shift rod, C, E, F |
80 | 36,29 | Exhaust tube, 2 dia. |
82 | 1,71 | Reverse gate cushion (requires epoxy to adhere to housing) |
83 | 1,71 | Shear pin, 1/4 |
85 | 0,00 | Reverse gate only, (NO LONGER AVAILABLE) |
90,41 | 428,45 | Driveshaft assembled in bearing carrier C |
90,43 | 428,45 | Driveshaft assembled in bearing carrier EF short, straight or offset studs |
91 | 0,00 | Reverse gate assy, (NO LONGER AVAILABLE) |
93,21 | 46,46 | Liner, intake 5 7/8 with bolts & lockwashers |
93,22 | 46,46 | Liner, intake 6 1/8 with bolts & lockwashers |
98 | 2,19 | Spacer, shift spline, Mercury 1967 & earlier |
99 | 0,00 | Shift arm assy, E, F, (no longer available, send in for repair) |
100,42 | 575,61 | Main housing with exhaust tube E, F, no reverse gate |
104 | 285,48 | Intake casing only 6 5/8 thru 7 3/16 (see assy's 141.1-141.3) - specify color |
106,21 | 220,50 | Impeller 6 5/8 aluminum, w/sleeve 136 & 2 tee keys 1706 |
106,22 | 220,50 | Impeller 6 5/8 CB aluminum, w/sleeve 136 & 2 tee keys 1706 |
106,23 | 220,50 | Impeller 6 7/8 aluminum, w/sleeve 136 & 2 tee keys 1706 |
106,24 | 220,50 | Impeller 7 3/16 aluminum, w/sleeve 136 & 2 tee keys 1706 |
106,25 | 220,50 | Impeller 7 3/8 aluminum, w/sleeve 136 & 2 tee keys 1706 |
108 | 131,58 | Bearing carrier with seals, for single bearing, 1/4 mounting bolts |
108,5 | 131,58 | Same as assy #108 except uses 5/16 mounting bolts |
110 | 0,00 | Reverse gate large (NO LONGER AVAILABLE) |
111 | 20,05 | Shift rod, G, P |
114 | 203,21 | Driveshaft only G short, (see assy #142) |
117 | 3,90 | Grill bar/ea, large - sold individually, 9 equals complete set |
118 | 0,00 | Shift arm assembly, G, (no longer available, send in for repair) |
119 | 2,19 | Gasket, water pump, G |
120 | 4,28 | Mounting stud, long |
121 | 0,57 | Shim washer, large |
122 | 9,88 | Nut, driveshaft, drilled 3/4 |
122,1 | 8,17 | Nut, driveshaft, flat only, not drilled 3/4 |
123 | 4,09 | Mounting stud, short |
126 | 209,67 | Driveshaft only G long, (see assy #143) |
128 | 40,57 | Exhaust tube, 2 1/2 dia. |
130 | 19,00 | Cam, nylon modified 39021, G, P, (only 6 tooth spline) |
131 | 6,56 | Cam, nylon modified 37422, lower (G65 only) |
132 | 5,42 | Cam, nylon modified 37421, upper (G65 only) |
133 | 3,80 | Flat key, impeller, 3/4 dia. shaft, large |
134 | 50,45 | Liner, intake 6 5/8, with bolts & lockwashers |
135 | 50,45 | Liner, intake 6 7/8, with bolts & lockwashers |
136 | 2,28 | Shaft sleeve, impeller, 3/4 dia. shaft |
137 | 50,45 | Liner, intake 7 3/16, with bolts & lockwashers, 3 1/4 height |
141,1 | 370,88 | Intake assy 6 5/8, with grill bars & liner - specify color |
141,2 | 370,88 | Intake assy 6 7/8, with grill bars & liner - specify color |
141,3 | 370,88 | Intake assy 7 3/16, with grill bars & liner - specify color |
141,4 | 380,95 | Intake assy 7 3/8, with grill bars & liner - specify color |
142 | 452,77 | Driveshaft assembled in bearing carrier G short, uses 1/4 bolts |
142,1 | 452,77 | Same as assy #142 except uses 5/16 mounting bolts |
143 | 456,00 | Driveshaft assembled in bearing carrier G long, uses 1/4 bolts |
143,1 | 456,00 | Same as assy #143 except uses 5/16 mounting bolts |
145 | 0,00 | Reverse gate assy (NO LONGER AVAILABLE) |
147 | 3,80 | Flat key, impeller, 5/8 dia. shaft, medium |
148 | 3,80 | Pivot, reverse gate, split arm |
151 | 7,41 | Shift guide, long, U |
153 | 14,44 | Bracket, cable support, Mercury, (see assy #334) |
156 | 14,44 | Bracket, cable support, OMC, (see assy #170) Morse (see #171) |
156,1 | 14,44 | Bracket, cable support, bent for AQ, AW (see #171.1) |
167 | 8,84 | Hinge support, latch, E, F |
168 | 6,08 | Keeper, latch, E, F |
169 | 21,57 | Forward lock, E, F, G, P, AC, (for use with steering handle) |
170 | 24,51 | Bracket, cable support with OMC #305736 clip |
171 | 16,63 | Bracket, cable support with, Morse cable clamp & shim |
171,1 | 16,63 | Bracket, cable support with, Morse cable clamp & shim bent for AQ, AW |
171,2 | 16,63 | Bracket, cable support with, Morse cable clamp & shim bent for AQ SHO |
172 | 17,48 | Shift arm, all except, O |
174 | 6,27 | Shift lockout rod, J |
178 | 164,64 | Driveshaft only L60 short, (see assy #196) |
180 | 3,33 | Spacer, rear mounting bolt, AC |
181 | 3,33 | Spacer, rear mounting bolt, L,M,AB,R |
188 | 180,88 | Driveshaft only M4 tooth, (see assy #198) |
190 | 684,76 | Main housing with exhaust tube, L, no reverse gate |
195 | 179,46 | Driveshaft only L60 long 4 tooth, (see assy #197) |
196 | 400,62 | Driveshaft assembled in bearing carrier L60 short, 1/4 bolts |
196,1 | 400,62 | Same as assy #196 except uses 5/16 mounting bolts |
197 | 420,76 | Driveshaft assembled in bearing carrier L60 long uses 1/4 bolts |
197,1 | 420,76 | Same as assy #197 except uses 5/16 mounting bolts |
198 | 436,34 | Driveshaft assembled in bearing carrier M, uses 1/4 bolts |
198,1 | 436,34 | Same as assy #198 except uses 5/16 mounting bolts |
200 | 183,83 | Driveshaft only EF long, (see assy #257) |
204 | 250,04 | Intake only 5 3/4 - 6, (see assys #224.1, 224.2) |
206 | 160,27 | Impeller 5 3/4 with sleeve 220 |
207 | 160,27 | Impeller 6 - (1/2 dia. shaft) with sleeve 220 |
208 | 129,20 | Bearing carrier with seals, H, (bearing not included) |
210 | 69,35 | Reverse gate only, H, H79, V, (see assy #228) |
211 | 7,22 | Shift lever H, Q |
214 | 135,66 | Driveshaft only H, (see assy #225) |
215 | 3,33 | Grill bar/ea, small - sold individually, 8 equals complete set |
216 | 3,04 | Grill rod/ea, small - (2 required) |
217 | 4,47 | Shear pin keeper |
218 | 0,29 | Shim washer |
219 | 14,16 | Shift rod only, H, H79, (see assy #227) |
220 | 3,33 | Shaft sleeve, impeller, 1/2 dia. |
221 | 18,81 | Exhaust tube, 1-1/2 dia. |
222 | 4,66 | Nut, driveshaft 1/2 |
223 | 1,71 | Shear pin, small |
224,1 | 296,78 | Intake assy 5 3/4, with grill bars & liner |
224,2 | 296,78 | Intake assy 6, with grill bars & liner - specify color |
225 | 343,90 | Driveshaft assembled in bearing carrier H |
227 | 38,57 | Shift rod assy, less shift lever H, H79 |
228 | 76,00 | Reverse gate assy, with pins & bushings, H, H79, V |
251 | 182,31 | Driveshaft only L50 short, (see assy #252) |
252 | 425,22 | Driveshaft assembled in bearing carrier L50 short, uses 1/4 bolts |
252,1 | 425,22 | Same as assy #252 except uses 5/16 mounting bolts |
254 | 192,00 | Driveshaft only L50 long, (see assy #255) |
255 | 430,07 | Driveshaft assembled in bearing carrier L50 long, uses 1/4 bolts |
255,1 | 430,07 | Same as assy #255 except uses 5/16 mounting bolts |
257 | 437,38 | Driveshaft assembled in bearing carrier EF long, straight or offset studs |
277 | 2,28 | Elect. shift cable exhaust housing plug L, M |
285 | 25,65 | Shift handle assembly, L50M - thru 1980 |
287 | 46,08 | Liner, intake 5 3/4, with bolts & lockwashers |
290 | 13,21 | Shift rod only, L50, short, (see assy #339), U4L cam, (see #1283) |
291 | 14,44 | Shift rod only, L50, long, (see assy #340) |
292 | 8,74 | Stud, offset, E, F - 2/unit (effective July '72 motors) |
295 | 195,61 | Driveshaft only M73 20 tooth, (see assy #297) |
296,41 | 48,93 | Manual start shift kit, short, up to and including 1980, L50 |
296,43 | 50,16 | Manual start shift kit, long, up to and including 1980, L50L |
298,2 | 7,22 | Exhaust housing shift rod hole plug AB, AF |
298,3 | 7,22 | Exhaust housing shift rod hole plug L, M, R |
299 | 17,10 | Shift arm assy, O, with Chrysler #98273 rod end |
303 | 132,34 | Bearing carrier with seals, J, changed in 1980, 2 or 4 1/4 bolts |
305 | 140,41 | Driveshaft only J short, (see assy #308) |
308 | 362,62 | Driveshaft assembled in bearing carrier J short, 2 or 4 1/4 bolts |
309 | 15,49 | Shift arm assy, with Chrysler. #98273 rod end, J |
313 | 121,22 | Adapter plate, O |
315 | 190,57 | Driveshaft only O short, (see assy #316) |
316 | 422,37 | Driveshaft assembled in bearing carrier O short, 1/4 bolts |
316,1 | 422,37 | Same as assy #316 except uses 5/16 mounting bolts |
318 | 200,55 | Driveshaft only O long, (see assy #319) |
319 | 431,49 | Driveshaft assembled in bearing carrier O long, uses 1/4 bolts |
319,1 | 431,49 | Same as assy #319 except uses 5/16 mounting bolts |
320 | 8,36 | Shim, water pump impeller, O |
322 | 180,88 | Driveshaft only A74 11/16 dia. shaft, 17 tooth, (see assy #336) |
326 | 167,87 | Driveshaft only P short, (see assy #331) |
328 | 177,46 | Driveshaft only P long, (see assy #332) |
330 | 0,00 | Shift arm assy, P, (no longer available, send in for repair) |
331 | 400,62 | Driveshaft assembled in bearing carrier P short, uses 1/4 bolts |
331,1 | 400,62 | Same as assy #331 except uses 5/16 mounting bolts |
332 | 410,02 | Driveshaft assembled in bearing carrier P long, uses 1/4 bolts |
332,1 | 410,02 | Same as assy #332 except uses 5/16 mounting bolts |
334 | 15,96 | Bracket, cable support, with nut and bolt, Mercury (see #153) |
335 | 2,85 | Spacer, cable pin lock, E, F, G, P |
336 | 387,13 | Driveshaft assembled in bearing carrier A74 |
345 | 129,20 | Bearing carrier with seals, K, (bearing not included) |
347 | 94,05 | Adapter plate, Q |
349 | 140,51 | Driveshaft only Q short, (see assy #350) |
350 | 347,23 | Driveshaft assembled in bearing carrier Q short |
351 | 11,31 | Shift rod only, short, Q, (see assy #386) |
352 | 6,27 | Tube, driveshaft shield extension, Q, with 532 O ring |
353 | 7,51 | Water tube extension, Q, with #522 O ring |
355 | 148,68 | Driveshaft only Q long, (see assy #358) |
356 | 15,30 | Shift arm, C, E, F, J, Z, AB, U2-3, U4R |
357 | 576,84 | Main housing with exhaust tube, Q, no reverse gate |
358 | 354,54 | Driveshaft assembled in bearing carrier Q long |
364 | 12,26 | Shift rod only, Q, long, (see assy #386) |
365,2 | 2,00 | Adapter sleeve, H79 |
370 | 132,53 | Bearing carrier with seals, Q, (bearing not included) |
383 | 196,94 | Driveshaft only single bearing R, (see assy #384) |
385 | 686,47 | Main housing with exhaust tube, R, no reverse gate |
386 | 38,57 | Shift rod assy, Q, short, less shift lever - before cam gate |
387 | 38,57 | Shift rod assy, Q, long, less shift lever - before cam gate |
393 | 163,21 | Bearing carrier with seals, for double bearings, 1/4 mounting bolts |
393,5 | 163,21 | Same as assy #393 except uses 5/16 mounting bolts |
398 | 3,80 | Ring, water pump, E, F, 1978 |
399 | 2,38 | Gasket, water pump, P, E, F |
400 | 577,22 | Driveshaft assembled in bearing carrier S, uses 1/4 bolts |
400,1 | 577,22 | Same as assy #400 except uses 5/16 mounting bolts |
400,3 | 234,18 | Driveshaft only S, (see assy #400) |
401,4 | 696,07 | Main housing with exhaust tube, S, no reverse gate |
403 | 64,70 | Spotfacer & drill kit 5/8 dia x 5/16 shank, (X model only) |
403,23 | 55,01 | Spotfacer & drill kit 5/8 dia x 3/8 shank, (all others) |
404 | 5,70 | Backup washer, double bearings |
407 | 562,69 | Driveshaft assembled in bearing carrier RD, uses 1/4 bolts |
407,1 | 562,69 | Same as assy #407 except uses 5/16 mounting bolts |
407,3 | 219,45 | Driveshaft only RD, (see assy #407) |
408 | 72,39 | External shift linkage kit, G, P |
408,1 | 72,39 | External shift linkage kit, E, F |
409 | 342,57 | Driveshaft assembled in bearing carrier H79 |
409,3 | 140,41 | Driveshaft only H79, (see assy #409) |
410 | 1,71 | Roll, water pump, AB, Q |
411 | 0,00 | Roll, water pump, L, R, (replaced by 631) |
413 | 127,21 | Bearing carrier with seals, H79, (bearing not included) |
414 | 174,33 | Impeller 6-79, 5/8 dia. shaft, w/sleeve 36.1 & 2 tee keys 1705 |
428 | 2,66 | Shift rod pilot, S |
429 | 177,46 | Bearing housing components, (2 bearings), large series |
431 | 83,98 | Reverse gate only, S, (see assy #435) |
432 | 32,11 | Upper seal carrier with 2 seals, large series |
433 | 30,69 | Upper seal carrier with 2 seals, medium & small series |
434 | 4,56 | Tee key, impeller, 3/4 dia. shaft, large, square |
435 | 108,02 | Reverse gate assy, with pins & bushings, S, gate #431 |
437 | 130,72 | Adapter plate, T50/65 |
440 | 187,15 | Driveshaft only T50/65 short, (see assy #458) |
443 | 187,15 | Driveshaft only T50/65 long, (see assy #459) |
444 | 130,72 | Adapter plate, T85 |
448 | 1,90 | Centering sleeve, small, T, all models |
449 | 2,09 | Centering sleeve, large, T, all models |
450 | 1,90 | Shift bushing, T, all models |
451 | 4,09 | Water tube extension, T50/65, with O ring 529 |
452 | 4,28 | Water tube extension, T85, with O ring 530 |
458 | 439,19 | Driveshaft assembled in bearing carrier T50/65 short, 1/4 bolts |
458,1 | 439,19 | Same as assy #458 except uses 5/16 mounting bolts |
459 | 439,19 | Driveshaft assembled in bearing carrier T50/65 long, 1/4 bolts |
459,1 | 439,19 | Same as assy #459 except uses 5/16 mounting bolts |
461 | 686,47 | Main housing with exhaust tube, T, no reverse gate |
462 | 43,04 | Seal, snap & O ring kit, (bearing not included) |
462,1 | 101,08 | Seal, snap & O ring kit, (1 bearing included) 7305B |
462,2 | 159,22 | Seal, snap & O ring kit, (2 bearings included) 7305B |
463 | 4,09 | Stud |
464 | 22,80 | Motor shift rod coupling, Q |
465 | 55,01 | Motor shift rod threading tool, Q |
467 | 6,75 | Collar, 7305 bearing backfit kit |
468 | 133,67 | Backfit kit lrg (converts 5305 bearing to single row 7305B) |
471 | 98,90 | Adapter plate with guide tube, U2,3, (specify short or long) |
472 | 2,00 | Bushing, adapter plate, Q, prior to 1982 |
477 | 6,37 | Collar, 7205 bearing backfit kit |
478 | 9,50 | Shift lever, U |
479 | 7,51 | Shift guide, U, short |
480 | 19,10 | Shift rod only short U2-3, #498, U4S, #1282, AE, #1385 |
483 | 182,31 | Driveshaft only U2-3 short (see assy #484) |
484 | 425,22 | Driveshaft assembled in bearing carrier U2-3 short |
486 | 578,65 | Main housing with exhaust tube, U2,3, no reverse gate |
490 | 193,80 | Driveshaft only U2 long, (see assy #491) |
491 | 436,34 | Driveshaft assembled in bearing carrier U2 long |
492 | 13,87 | Shift rod only, Z40LM, (see assy #1217), U2 long, (see assy #499) |
494 | 50,45 | Liner, intake 7 3/8, with bolts & lockwashers, 2 11/16 height |
497 | 295,36 | Intake casing only, 7 3/8, (see assy #141.4) - specify color |
498 | 51,11 | Shift rod assy, U2-3, short, complete with shift lever |
499 | 52,44 | Shift rod assy, U2, long, complete with shift lever |
502 | 56,72 | Bearing, single row, 7305B |
504 | 46,46 | Bearing, single row, 7205B |
506 | 4,47 | Shaft seal, inner |
507 | 3,99 | Shaft seal, outer |
511 | 0,76 | Retaining ring, Truarc 5100-98 |
512 | 3,33 | Retaining ring, Truarc N5002-212 ZD |
513 | 3,33 | Retaining ring, Truarc N5002-250 ZD |
517 | 2,00 | Retaining ring, Spirolox RR-150 S |
520 | 0,57 | O ring, 1/16 x 5/8 x 3/4 - 016 |
521 | 0,29 | O ring, 1/16 x 5/16 x 7/16 - 011 |
524 | 0,76 | O ring, 1/8 x 1-7/8 x 2-1/8 - 225 |
525 | 0,76 | O ring, 1/8 x 2-1/4 x 2-1/2 - 228 |
525,1 | 0,76 | O ring, 1/8 x 13/16 x 1-1/16 - 211 |
526 | 0,76 | O ring, 3/32 x 1-15/16 x 2-1/8 - 135 |
527 | 0,76 | O ring, 3/32 x 2-5/16 x 2-1/2 -141 |
528 | 0,76 | O ring, 3/32 x 1/2 x 11/16 - 112 |
529 | 0,76 | O ring, 1/16 x 7/16 x 9/16 - 013 |
530 | 0,76 | O ring, 1/16 x 1/2 x 5/8 - 014 |
531 | 0,76 | O ring, 1/16 x 9/16 x 11/16 - 015 |
532 | 0,76 | O ring, 1/16 x 3/4 x 7/8 - 018 |
532,1 | 0,76 | O ring, 1/16 x x 7/8 x 1 - 020 |
532,2 | 0,76 | O ring, metric, 10mm x 2mm |
533 | 0,76 | Nylon sleeve, Nyliner 4L4F 1/4 ID |
534 | 1,71 | Nylon sleeve, Nyliner 5L7F 5/16 ID |
535 | 0,76 | Nylon sleeve, Nyliner 6L11FK 3/8 ID |
536 | 0,76 | Nylon sleeve, Nyliner 4217A 1/2 ID |
537 | 0,76 | Nylon cable clamp |
539 | 0,76 | Grease fitting, STD. |
541 | 2,00 | Spring clip, rod end 1/4 3614 (no longer used) |
542 | 2,38 | Shim, Morse cable |
543 | 0,76 | Cable clamp, Chrysler #154317 |
543,1 | 8,36 | Cable anchor, morse #36174 |
544 | 2,00 | Ball rod end, Chrysler #98273 |
544,1 | 12,07 | Cable ball joint, morse #31799-001 |
545 | 5,13 | Terminal eye, Morse A300646 |
546 | 6,37 | Cable anchor clip, OMC #305736 |
547 | 51,40 | Cable, 4 ft. Morse 33C |
547,1 | 52,63 | Cable, 4 1/2 ft. Morse 33C |
547,2 | 54,06 | Cable, 5 ft. Morse 33C |
548 | 3,99 | Allen wrench, 3/16 |
549 | 47,69 | Cable, 3 1/2 ft. Morse 33C |
550 | 13,02 | Grease gun, Jiffy Luber |
550,5 | 23,94 | Grease gun, pistol grip 30-310 |
551 | 3,80 | Knob, 1 3/8 dia. |
552 | 8,46 | Grease, 10 oz. tube, Lubriplate 630AA |
552,5 | 11,31 | Grease, 14 oz cartridge 630-2 |
552,7 | 8,46 | Grease, 8 oz tube, Quicksilver 2-4-C (replaces 552 and works w/550) |
553 | 12,83 | Rod end, ball, V |
553,1 | 7,60 | Rod end, #10 ball hole - Morse #33C cable |
553,2 | 7,60 | Rod end, 1/4 ball hole - Morse #33C cable |
555 | 44,18 | Cable, Morse 33C, 3 ft. |
556 | 55,58 | Cable, Morse 33C, 6 ft. |
558 | 0,76 | Screw, fil head slotted, #10-32 x 1-1/4 long |
558,1 | 0,76 | Screw, fil head slotted, #10-32 x 1-1/2 long |
558,4 | 0,76 | Bolt, pan fil head, #10-32 x 3/4 long |
559 | 0,76 | Screw, fil head slotted, #10-32 x 1 long |
559,1 | 0,76 | Screw, fil head slotted, #10-32 x 1 long, nylon lock |
559,2 | 0,76 | Screw, fil head slotted, #10-32 x 1-1/4 long, nylon lock |
561 | 0,76 | Screw, fil head slotted, #10-24 x 5/8 long |
561,1 | 0,76 | Screw, fil head slotted, #10-24 x 3/4 long |
562 | 0,76 | Screw, pan head, #10-32 x 1/2 long |
562,1 | 0,76 | Screw, pan head, #10-32 x 5/8 long |
564 | 0,76 | Cap screw, socket head knurled, 1/4-20 x 3/4 long, for allen wrench |
564,1 | 0,76 | Cap screw, socket head knurled, 1/4-20 x 1 long |
565 | 0,76 | Set screw, hollow head, 3/8-16 x 1/2 long |
566 | 0,76 | Cap screw, socket head, 1/4-20 x 1 1/4 long |
568 | 0,76 | Bolt, hex head, 1/4-20 x 3/8 long |
569 | 2,19 | Bolt, hex head, 3/8-16 x 2 long |
571 | 0,76 | Bolt, hex head, 1/4-20 x 1/2 long |
572 | 0,76 | Bolt, hex head, 1/4-20 x 5/8 long |
573 | 0,76 | Bolt, hex head, 1/4-20 x 3/4 long |
574 | 1,33 | Bolt, hex head, 1/4-20 x 3/4 long, nylon lock |
574,1 | 1,33 | Bolt, hex head, 1/4-20 x 1 long, nylon lock (replaces #577 & #638) |
575 | 0,76 | Bolt, hex head, 1/4-20 x 7/8 long |
576 | 0,76 | Bolt, hex head, 1/4-20 x 1 long |
578 | 0,76 | Bolt, hex head, 1/4-20 x 1-3/4 long |
578,1 | 0,76 | Bolt, hex head, 1/4-20 x 2 long |
579 | 2,47 | Bolt, hex head, 1/4-20 x 2-1/8 long |
580 | 3,33 | Bolt, hex head, 1/4-20 x 2-11/16 long |
581 | 0,76 | Bolt, hex head, 1/4-20 x 2-3/4 long |
582 | 0,76 | Bolt, hex head, 1/4-20 x 2-3/4 long, fully threaded |
583 | 0,76 | Bolt, hex head, 1/4-28 x 1 long |
584 | 0,76 | Bolt, hex head, 1/4-20 x 2-1/2 long |
585 | 0,76 | Bolt, hex head, 1/4-20 x 1-1/4 long |
586 | 0,76 | Bolt, hex head, 1/4-20 x 2-1/4 long |
587 | 0,76 | Screw, flat head, 1/4-20 x 1-1/4 long |
587,2 | 0,76 | Screw, flat head phillips, 1/4-20 x 3/4 long |
587,3 | 0,76 | Bolt, hex head, M6 x 1.0 x 25MM |
588 | 3,04 | Bolt, hex head, M10 x 1.5 x 60MM |
588,1 | 2,38 | Bolt, hex head, M10 x 1.5 x 30MM |
588,2 | 1,71 | Bolt, hex head, M10 x 1.5 x 35MM |
589 | 3,61 | Bolt, hex head, M10 x 1.5 x 70MM |
590 | 3,99 | Bolt, hex head, M10 x 1.5 x 90MM |
591 | 2,19 | Bolt, hex head, M8 x 1.25 x 30MM |
592 | 2,19 | Bolt, hex head, M10 x 1.25 x 35MM |
592,1 | 3,80 | Bolt, soc head, M10 x 1.5 x 35MM |
592,2 | 8,84 | Bolt, hex head, M10 x 1.25 x 60MM |
592,3 | 9,03 | Bolt, hex head, M10 x 1.25 x 70MM |
592,4 | 9,50 | Bolt, hex head, M10 x 1.25 x 90MM |
592,5 | 11,78 | Bolt, hex head, M10 x 1.25 x 100MM |
593 | 3,42 | Bolt, hex head, M8 x 1.25 x 100MM |
594 | 0,76 | Bolt, hex head, 5/16-18 x 1/2 long |
595 | 1,33 | Bolt, hex head, 5/16-18 x 2 long |
596 | 0,76 | Bolt, hex head, 5/16-18 x 7/8 long |
597 | 0,76 | Bolt, hex head, 5/16-18 x 1-1/4 long |
597,1 | 0,76 | Bolt, hex head, 5/16-18 x 1-3/4 long |
598 | 1,33 | Bolt, hex head, 5/16-18 x 2-1/4 long |
599 | 1,33 | Bolt, hex head, 5/16-18 x 2-3/4 long |
600 | 1,52 | Bolt, hex head, 5/16-18 x 3-1/4 long |
600,1 | 1,52 | Bolt, hex head, 5/16-18 x 3-1/2 long |
601 | 1,33 | Bolt, hex head, 5/16-18 x 1-3/8 long |
602 | 0,76 | Bolt, hex head, 5/16-18 x 1 long |
602,1 | 1,33 | Bolt, hex head, 5/16-18 x 1 long, nylon lock |
603 | 1,33 | Bolt, hex head, 5/16-18 x 2-1/2 long |
604 | 2,00 | Bolt, hex head, 5/16-18 x 4 long |
605 | 2,28 | Bolt, hex head, 3/8-16 x 3-3/8 long |
606 | 1,33 | Bolt, hex head, 3/8-16 x 1-1/4 long |
607 | 1,33 | Bolt, hex head, 3/8-16 x 1-1/2 long |
608 | 2,00 | Bolt, hex head, 3/8-16 x 2-1/4 long |
609 | 2,00 | Bolt, hex head, 3/8-16 x 2-3/4 long |
609,1 | 2,00 | Bolt, hex head, 3/8-16 x 2-7/8 long |
610 | 2,00 | Bolt, hex head, 3/8-16 x 3 long |
611 | 2,85 | Bolt, hex head, 3/8-16 x 3-1/4 long |
612 | 2,00 | Bolt, hex head, 3/8-16 x 4 long |
613 | 2,00 | Bolt, hex head, 3/8-16 x 3-1/2 long |
614 | 3,33 | Bolt, hex head, 3/8-16 x 4-1/4 long |
614,1 | 1,52 | Bolt, hex head, 7/16-14 x 1-1/4 long |
614,2 | 1,90 | Bolt, hex head, 1/2-13 x 2-1/2 long |
614,3 | 2,00 | Bolt, hex head, 1/2-13 x 3-1/2 long |
615 | 2,28 | Dowel pin, 8 x 12MM |
616 | 2,09 | Dowel pin, 6 x 16MM |
616 | 2,09 | Dowel pin, 6 x 16MM |
616,2 | 2,09 | Dowel pin, 6 x 10MM |
616,5 | 2,09 | Dowel pin, 4 x 8MM |
617 | 0,76 | Roll pin, 3/32 x 3/4 long |
618 | 0,76 | Roll pin, 1/8 x 3/4 long |
619 | 0,76 | Nut, fiber lock, #10-24 |
620 | 0,76 | Nut, plain 3/8-16 |
621 | 0,76 | Nut, fiber lock, #10-32 |
621,1 | 0,76 | Nut, jam, #10-32 |
622 | 0,76 | Nut, 1/4-28 |
623 | 0,76 | Nut, fiber lock, 1/4-20 |
624 | 0,76 | Nut, fiber lock, 1/4-28 |
625 | 0,76 | Nut, fiber lock, 5/16-18 |
626 | 0,76 | Nut, fiber lock, 7/16-20 |
626,1 | 1,43 | Nut, fiber lock, 1/2-13 brass |
627 | 0,76 | Nut, plain, 7/16-20 |
628 | 0,76 | Nut, plain, 1/4-20 |
628,1 | 0,76 | Nut, square 1/4-20 |
629 | 2,00 | Bolt, hex head, M6 x1.0 X 16MM |
630 | 2,85 | Dowel pin, 3/8 x 7/8 long |
631 | 0,76 | Dowel pin, 3/16 x 1/2 long |
632 | 0,76 | Washer, plain, #10 |
632,1 | 0,76 | Washer, M5, star lock |
633 | 1,33 | Washer, 1/4 x 1 OD |
633,1 | 1,33 | Washer, 1/2 x 1 1/4 OD x .105 thick |
634 | 0,76 | Washer, plain, #5 |
635 | 0,76 | Washer, plain, 1/4 |
636 | 0,76 | Washer, spring lock, M10 |
637 | 0,76 | Washer, spring lock, #10 |
638 | 0,76 | Washer, spring lock, 1/4 medium |
640 | 0,76 | Washer, spring lock, 5/16 medium |
641 | 0,76 | Washer, spring lock, 3/8 medium |
641,1 | 0,76 | Washer, spring lock, 7/16 medium |
642 | 0,76 | Washer, 5/16 x 9/16 x 1/32 thick, red fiber |
643 | 1,43 | Washer, 1 x 3/8 x 1/32 thick, red fiber |
644 | 1,71 | Washer, plain, 3/8 x 1-3/4 |
645 | 0,76 | Cotter pin, 1/16 x 5/8 long |
646 | 0,76 | Cotter pin, 3/32 x 1-1/4 long |
647 | 0,76 | Cotter pin 1/8 x 1-1/2 long |
648 | 0,76 | Cotter pin, 1/8 x 1-3/4 long |
734 | 28,12 | Hardware bag, Jet Drive kit, A |
736 | 25,94 | Hardware bag, Jet Drive kit, B |
738 | 60,71 | Hardware bag, Jet Drive kit, C |
739 | 73,82 | Hardware bag, Jet Drive kit, E, F |
739,1 | 31,07 | Hardware bag, Jet Drive kit, AKM |
739,2 | 45,32 | Hardware bag, Jet Drive kit, AKR |
739,3 | 31,07 | Hardware bag, Jet Drive kit, AKC-43 |
740 | 80,09 | Hardware bag, Jet Drive kit, G |
741 | 17,96 | Hardware bag, Jet Drive kit, H |
741,1 | 31,07 | Hardware bag, Jet Drive kit, AMC |
741,2 | 45,32 | Hardware bag, Jet Drive kit, AM |
742 | 40,66 | Hardware bag, Jet Drive kit, J |
743 | 52,44 | Hardware bag, Jet Drive kit, K |
744 | 42,56 | Hardware bag, Jet Drive kit, L |
744,1 | 42,56 | Hardware bag, Jet Drive kit, L, taper lock parts included |
745 | 27,36 | Hardware bag, Jet Drive kit, L50M, L50C |
746 | 41,90 | Hardware bag, Jet Drive kit, O |
747 | 71,92 | Hardware bag, Jet Drive kit, P |
748 | 38,57 | Hardware bag, Jet Drive kit, Q |
749 | 41,61 | Hardware bag, Jet Drive kit, R, RP |
749,2 | 41,61 | Hardware bag, Jet Drive kit, R, RP, taper lock parts included |
750 | 58,05 | Hardware bag, Jet Drive kit, S, SP |
750,01 | 58,05 | Hardware bag, Jet Drive kit, S, SP, taper lock parts included |
750,1 | 58,05 | Hardware bag, Jet Drive kit, SX, SPX |
750,11 | 58,05 | Hardware bag, Jet Drive kit, SX, SPX, taper lock parts included |
751 | 31,92 | Hardware bag, Jet Drive kit, H79 |
751,1 | 65,36 | Hardware bag, Jet Drive kit, BM |
752 | 55,20 | Hardware bag, Jet Drive kit, T50/T65 |
753 | 49,97 | Hardware bag, Jet Drive kit, T85 |
754 | 44,18 | Hardware bag, Jet Drive kit, U |
754,1 | 44,18 | Hardware bag, Jet Drive kit, U4-60 |
755 | 72,58 | Hardware bag, Jet Drive kit, V |
755,1 | 80,66 | Hardware bag, Jet Drive kit, AC |
755,11 | 80,66 | Hardware bag, Jet Drive kit, AC, taper lock parts included |
755,2 | 83,98 | Hardware bag, Jet Drive kit, AN-4M |
755,4 | 72,58 | Hardware bag, Jet Drive kit, BA |
755,5 | 45,32 | Hardware bag, Jet Drive kit, BB |
755,6 | 44,75 | Hardware bag, Jet Drive kit, BC |
755,7 | 44,18 | Hardware bag, Jet Drive kit, BD |
755,8 | 83,98 | Hardware bag, Jet Drive kit, BE90 |
755,9 | 83,98 | Hardware bag, Jet Drive kit, BE60 |
756 | 75,34 | Hardware bag, Jet Drive kit, W |
756,1 | 101,18 | Hardware bag, Jet Drive kit, AL |
756,2 | 101,18 | Hardware bag, Jet Drive kit, AP-Suzuki |
756,3 | 101,18 | Hardware bag, Jet Drive kit, AP-Evinrude |
756,4 | 101,18 | Hardware bag, Jet Drive kit, AW |
756,5 | 101,18 | Hardware bag, Jet Drive kit, AY |
756,6 | 101,18 | Hardware bag, Jet Drive kit, BH |
756,7 | 66,88 | Hardware bag, Jet Drive kit, BQ |
757 | 75,34 | Hardware bag, Jet Drive kit, X |
758 | 92,82 | Hardware bag, Jet Drive kit, Y |
758,1 | 89,68 | Hardware bag, Jet Drive kit, ZM |
758,2 | 101,18 | Hardware bag, Jet Drive kit, AQ SHO |
758,3 | 101,18 | Hardware bag, Jet Drive kit, AA, AAP |
758,301 | 101,18 | Hardware bag, Jet Drive kit, AQ |
758,4 | 89,68 | Hardware bag, Jet Drive kit, ZR |
758,5 | 40,47 | Hardware bag, Jet Drive kit, AJ |
758,6 | 92,82 | Hardware bag, Jet Drive kit, Y100-4 |
758,7 | 44,75 | Hardware bag, Jet Drive kit, AJ-43 Yamaha |
758,71 | 44,75 | Hardware bag, Jet Drive kit, AJ-43 EFI Yamaha |
758,8 | 80,28 | Hardware bag, Jet Drive kit, AR |
758,9 | 101,18 | Hardware bag, Jet Drive kit, AV |
759 | 90,35 | Hardware bag, Jet Drive kit, AB, taper lock parts included |
759,1 | 90,35 | Hardware bag, Jet Drive kit, ABL03, taper lock parts included |
759,3 | 66,03 | Hardware bag, Jet Drive kit, BI |
759,4 | 80,28 | Hardware bag, Jet Drive kit, BP |
759,6 | 80,28 | Hardware bag, Jet Drive kit, BR |
761 | 73,44 | Hardware bag, Jet Drive kit, G65 |
762 | 73,44 | Hardware bag, Jet Drive kit, G80 |
763 | 42,56 | Hardware bag, Jet Drive kit, M |
766 | 48,07 | Hardware bag, Jet Drive kit, U4R |
767 | 98,33 | Hardware bag, Jet Drive kit, AD |
767,1 | 95,10 | Hardware bag, Jet Drive kit, AHR |
767,2 | 88,16 | Hardware bag, Jet Drive kit, AHM |
767.2-14 | 89,21 | Hardware bag, Jet Drive kit, AHC 2014 |
767,4 | 43,42 | Hardware bag, Jet Drive kit, BT50-4 |
768 | 85,60 | Hardware bag, Jet Drive kit, AE |
768,1 | 85,60 | Hardware bag, Jet Drive kit, AE4M-30 |
768,2 | 85,60 | Hardware bag, Jet Drive kit, AE4R-30 |
769 | 90,35 | Hardware bag, Jet Drive kit, AF |
770 | 62,51 | Hardware bag, Jet Drive kit, AG |
770,1 | 62,51 | Hardware bag, Jet Drive kit, AG, taper lock parts included |
770,4 | 62,51 | Hardware bag, Jet Drive kit, BFC taper lock parts included |
770,5 | 62,51 | Hardware bag, Jet Drive kit, BF, taper lock parts included |
771 | 90,35 | Hardware bag, Jet Drive kit, AI |
771,1 | 83,41 | Hardware bag, Jet Drive kit, AN, taper lock parts included |
772 | 41,52 | Hardware bag, Jet Drive kit, AFC |
775 | 12,16 | Bracket cable, L50C |
776 | 8,36 | Plug handle, L50C |
777 | 1,90 | Shifter bushing |
778 | 103,74 | Manual shift kit, short, L, AB, AF, R |
779 | 108,78 | Manual shift kit, long, L, AB, AF, R |
780 | 134,24 | Bearing carrier with seals, U2-3, (bearing not included) |
781 | 2,00 | Nut keeper, 3/4 dia. shaft, large |
782 | 3,33 | Tee key, impeller, 5/8 dia. shaft, medium, square |
784 | 91,87 | Adapter plate, V |
786 | 50,16 | Pump adapter, V |
787 | 15,58 | Shift lever, V |
789 | 2,19 | Bushing lever, V |
790 | 2,38 | Spacer rod end, V |
796 | 140,51 | Driveshaft only V short, (see assy #797) |
797 | 342,57 | Driveshaft assembled in bearing carrier V short |
800 | 143,93 | Driveshaft only V long, (see assy #801) |
801 | 343,90 | Driveshaft assembled in bearing carrier V long |
802 | 86,83 | Bearing & seal kit 7205 |
803 | 43,04 | Seal, snap & O ring kit, (bearing not included) |
803,1 | 89,59 | Seal, snap & O ring kit, (1 bearing included) 7205B |
804 | 121,03 | Backfit kit small & med, converts 5205 bearing to 7205B |
805 | 1,90 | Nut keeper, 5/8 dia. shaft, medium |
806 | 101,37 | Shift lever assy, V, includes rod ends |
807 | 118,75 | Shift rod and lever assy, V, short |
807,1 | 13,40 | Shift rod, short, V, (see assy #807) |
808 | 119,70 | Shift rod and lever assy, V, long |
808,1 | 13,87 | Shift rod, long, V, (see assy #808) |
809 | 11,78 | Tilt rod latch, short, V |
810 | 12,07 | Tilt rod latch, long, V |
811 | 10,55 | Water tube extension, W, with O ring 520 |
813 | 127,78 | Bearing carrier with seals, V, (bearing not included) |
814 | 551,10 | Main housing with exhaust tube, V, no reverse gate |
816 | 134,05 | Adapter plate, W |
819 | 214,89 | Driveshaft only W, (see assy #820) |
821 | 3,23 | Pin, reverse gate pivot, 3/8 x 1-1/2 long-small |
822 | 3,23 | Pin, reverse gate pivot, 3/8 x 1-13/16 long-medium |
823 | 3,99 | Pin, reverse gate pivot, 1/2, large |
825 | 69,83 | Reverse gate only, 3/8 pin, H, H79, V, (see assy #834) |
826 | 74,39 | Reverse gate only, 3/8 pin, A, B, Q, U4M, (see assy #835) |
827 | 74,39 | Reverse gate only, 3/8 pin, (REPLACED BY PART 1222) |
828 | 0,00 | Reverse gate only, 1/2 pin (REPLACED BY PART 1223) |
829 | 0,00 | Reverse gate only, 1/2 pin, S, (REPLACED BY PART 1223) |
830 | 7,60 | Thrust washer, large, (use with #831), (can use #404 w/ #1534) |
831 | 6,75 | Spacer, 7305 backfit (use with #830), (see #1534) |
832 | 7,60 | Thrust washer, small, medium, (use with #833), (can use #1536 w/ #1535) |
833 | 6,75 | Spacer, 7205, (use with #832), (see #1535) |
834 | 76,57 | Reverse gate assy, with pins & bushings, H, H79, V, gate 825 |
835 | 77,52 | Reverse gate assy, with pins & bushings, A, B, Q, U4M, gate #826 |
836 | 77,52 | Reverse gate assy, (REPLACED BY PART 1222) |
837 | 0,00 | Reverse gate assy, large (REPLACED BY PART 1223) |
839 | 686,47 | Main housing with exhaust tube, W, no reverse gate |
840 | 0,00 | Reverse gate assy, (REPLACED BY PART 1223) |
844 | 47,03 | Pump adapter, X |
845 | 2,38 | Exhaust tube clip, 1 3/8 |
846 | 2,38 | Exhaust tube clip, 1 |
847 | 2,38 | Exhaust tube clip, 3/4 |
850 | 246,91 | Driveshaft only X, (see assy #856) |
851 | 9,31 | Water tube extension, X, with O ring 531 |
853 | 250,04 | Intake casing only 6 (see assy #224.2) - specify color |
855 | 46,65 | Liner, intake 6, with bolts & lockwashers (order part #1963 for model AEM) |
858 | 686,47 | Main housing with exhaust tube, X, no reverse gate |
860 | 55,20 | Adapter, water pump, U4 |
863 | 177,46 | Driveshaft only U3 long, (see assy #684) |
864 | 356,35 | Driveshaft assembled in bearing carrier U3 long |
867 | 176,04 | Driveshaft only U4 short, (see assy #868) |
868 | 354,54 | Driveshaft assembled in bearing carrier U4 short |
869 | 98,90 | Adapter plate with guide tube, U4, short |
871 | 147,06 | Adapter plate, Y |
873 | 48,17 | Pump adapter, Y |
874 | 3,61 | Shift guide, Y |
876 | 98,90 | Adapter plate with guide tube, U4, long |
877 | 180,88 | Driveshaft only Y90, (see assy #878) |
881 | 177,46 | Driveshaft only U4 long, (see assy #882) |
882 | 356,35 | Driveshaft assembled in bearing carrier U4 long |
884 | 15,01 | Shift rod only, short, U4, (see assy #888) |
885 | 13,68 | Shift rod only, long, U4, (see assy #889) |
886 | 3,33 | Spacer, 5/16 ID x 1/2 |
888 | 51,11 | Shift rod assy, complete, U4 short, complete with shift lever |
889 | 52,44 | Shift rod assy, complete, U4 long, complete with shift lever |
891 | 52,44 | Shift rod assy, complete, U3 long, complete with shift lever |
892 | 578,65 | Main housing with exhaust tube, U4, no reverse gate |
895 | 149,44 | Driveshaft only J long, (see assy #896) |
896 | 356,35 | Driveshaft assembled in bearing carrier J long |
902 | 578,65 | Main housing with exhaust tube, Z, no reverse gate |
904 | 147,06 | Adapter plate, Z |
906 | 49,12 | Pump adapter, Z |
908 | 684,76 | Main housing with exhaust tube, Y, no reverse gate |
910 | 176,04 | Driveshaft only Z40 short, with key #1275, (see assy #911) |
911 | 354,54 | Driveshaft assembled in bearing carrier Z40 short with key #1275 |
912 | 133,57 | Bearing carrier with seals, U4, (bearing not included) |
914 | 177,46 | Driveshaft only Z long, with key #1275, (see assy #915) |
915 | 356,35 | Driveshaft assembled in bearing carrier Z long with key #1275 |
917 | 133,57 | Bearing carrier with seals, Z, (bearing not included) |
920 | 179,46 | Driveshaft only Y70, (see assy #921) |
921 | 419,05 | Driveshaft assembled in bearing carrier Y70, uses 1/4 bolts |
921,1 | 419,05 | Same as assy #921 except uses 5/16 mounting bolts |
922 | 18,34 | Mounting bracket, gate shift |
923 | 9,88 | Neutral stop, gate shift |
924 | 12,26 | Handle, gate shift |
925 | 90,82 | Gate shift, handle assy only, no cable hardware |
926 | 8,65 | Neutral pivot, gate shift |
927 | 4,56 | Cable pivot, gate shift |
928 | 2,85 | Shift rod guide, sponge, Z |
930 | 211,66 | Driveshaft only GD long, (see assy #931) |
931 | 506,54 | Driveshaft assembled in bearing carrier GD long, uses 1/4 bolts |
931,1 | 506,54 | Same as assy #931 except uses 5/16 mounting bolts |
936 | 147,06 | Adapter plate, AA |
938 | 50,54 | Pump adapter, AA |
939 | 7,51 | Forward lock, gate shift |
941 | 691,13 | Main housing with exhaust tube, AA, no reverse gate |
943 | 3,99 | Shift guide, rod, AA |
948 | 234,46 | Impeller, 7 3/8 D, aluminum, w/sleeve 136 & 2 tee keys 1706 |
951 | 219,45 | Driveshaft only AA, (see assy #952) |
952 | 562,69 | Driveshaft assembled in bearing carrier AA, uses 1/4 bolts |
952,1 | 562,69 | Same as assy #952 except uses 5/16 mounting bolts |
955 | 212,99 | Driveshaft only WD, (see #956) |
956 | 498,94 | Driveshaft assembled in bearing carrier WD, uses 1/4 bolts |
956,1 | 498,94 | Same as assy #956 except uses 5/16 mounting bolts |
958 | 214,89 | Driveshaft only XD, (see assy #959) |
959 | 514,43 | Driveshaft assembled in bearing carrier XD, uses 1/4 bolts |
959,1 | 514,43 | Same as assy #959 except uses 5/16 mounting bolts |
961 | 198,36 | Driveshaft only MD73 (see assy #962) |
962 | 502,08 | Driveshaft assembled in bearing carrier MD73, uses 1/4 bolts |
962,1 | 502,08 | Same as assy #962 except uses 5/16 mounting bolts |
964 | 190,57 | Driveshaft only TD85 (see assy #965) |
965 | 509,77 | Driveshaft assembled in bearing carrier TD85, uses 1/4 bolts |
965,1 | 509,77 | Same as assy #965 except uses 5/16 mounting bolts |
967 | 183,83 | Driveshaft only YD90, (see assy #968) |
968 | 478,99 | Driveshaft assembled in bearing carrier YD90, uses 1/4 bolts |
968,1 | 478,99 | Same as assy #968 except uses 5/16 mounting bolts |
969 | 131,29 | Gate shift assy, complete, 3 ft. cable |
970 | 137,28 | Gate shift assy, complete, 3 1/2 ft. cable |
973 | 35,15 | Lever mount assy, V |
975 | 18,72 | Lube hose assy, complete, (replaces bellows 457) |
980 | 546,63 | Main housing with exhaust tube, AB, no reverse gate |
982 | 153,33 | Adapter plate, AB |
984 | 48,74 | Pump adapter, AB, AF |
987 | 166,63 | Driveshaft only AB short, (see assy #988) |
988 | 336,68 | Driveshaft assembled in bearing carrier AB short |
991 | 167,87 | Driveshaft only AB long (see assy #992) |
992 | 337,82 | Driveshaft assembled in bearing carrier AB long |
994 | 133,57 | Bearing carrier with seals, AB, (bearing not included) |
996 | 188,77 | Driveshaft only T5-65 short, (see assy #997) |
997 | 439,19 | Driveshaft assembled in bearing carrier T5-65 short, uses 1/4 bolts |
997,1 | 439,19 | Same as assy #997 except uses 5/16 mounting bolts |
999 | 188,77 | Driveshaft only T5-65 long, (see assy #1000) |
1000 | 439,19 | Driveshaft assembled in bearing carrier T5-65 long, uses 1/4 bolts |
1000,1 | 439,19 | Same as assy #1000 except uses 5/16 mounting bolts |
1002 | 212,99 | Driveshaft only W6D, (see assy #1003) |
1003 | 498,94 | Driveshaft assembled in bearing carrier W6D, uses 1/4 bolts |
1003,1 | 498,94 | Same as assy #1003 except uses 5/16 mounting bolts |
1007 | 686,47 | Main housing with exhaust tube, AC, no reverse gate |
1009 | 48,17 | Pump adapter, AC |
1013 | 44,56 | Shift arm assy, AC |
1016 | 216,13 | Driveshaft only AC, (see assy #1017) |
1017 | 506,54 | Driveshaft assembled in bearing carrier AC, uses 1/4 bolts |
1017,1 | 506,54 | Same as assy #1017 except uses 5/16 mounting bolts |
1018 | 2,66 | Cam spacer, AC |
1022 | 2,28 | Flush screw, L, M, O, R, S, T, U, W, X, Y, Z, AA, AB, AC, AD, AF, AH |
1023 | 0,86 | Flush washer, L, M, O, R, S, T, U, W, X, Y, Z, AA, AB, AC, AD, AF, AH |
1024 | 2,28 | Flush screw Y, Z, AA, (BLUE YAMAHA ONLY) |
1025 | 0,86 | Flush washer Y, Z, AA, (BLUE YAMAHA ONLY) |
1034 | 13,78 | Shift cam, large series |
1035 | 13,78 | Shift cam, medium series |
1036 | 4,09 | Eccentric, cam |
1037 | 1,52 | Bushing, cam |
1038 | 1,52 | Washer, cam |
1039 | 0,29 | Shim, cam |
1042 | 5,42 | Roller with bushing, cam gate |
1043 | 6,46 | Shaft for roller, cam gate |
1064 | 16,44 | Flushing fitting 24789A1 (Part 1065 for Yamaha Jet Drives) |
1120 | 179,46 | Driveshaft only L60L-89, 17 tooth, (see assy #1121) |
1121 | 420,76 | Driveshaft assembled in bearing carrier L60L-89, uses 1/4 bolts |
1121,1 | 420,76 | Same as assy #1121 except uses 5/16 mounting bolts |
1124 | 2,19 | Gasket - water pump, S |
1126 | 53,68 | Pump adapter, AD |
1127 | 3,23 | Pump gasket, AD |
1129 | 147,06 | Adapter plate, AD |
1132 | 183,83 | Driveshaft only AD, (see assy # 1133) |
1133 | 478,99 | Driveshaft assembled in bearing carrier AD, uses 1/4 bolts |
1133,1 | 478,99 | Same as assy #1133 except uses 5/16 mounting bolts |
1136 | 684,76 | Main housing with exhaust tube, AD, no reverse gate |
1138 | 50,45 | Pump adapter, AE |
1139 | 2,19 | Pump gasket, AE |
1141 | 91,87 | Adapter plate, AE |
1144 | 142,22 | Driveshaft only AE (see assy # 1145) |
1145 | 342,57 | Driveshaft assembled in bearing carrier AE |
1148 | 551,10 | Main housing with exhaust tube, AE, no reverse gate |
1149 | 10,17 | Gate arm, AE |
1150 | 15,20 | Shift lever, AE |
1152 | 147,06 | Adapter plate, AF |
1155 | 176,04 | Driveshaft only AF short, (see assy # 1156) |
1156 | 354,54 | Driveshaft assembled in bearing carrier AF short |
1159 | 177,46 | Driveshaft only AF long, (see assy # 1160) |
1160 | 356,35 | Driveshaft assembled in bearing carrier AF long |
1163 | 546,63 | Main housing with exhaust tube, AF, no reverse gate |
1164 | 1,43 | Spring - rod end |
1166 | 127,78 | Bearing carrier with seals, AE, (bearing not included) |
1168 | 133,57 | Bearing carrier with seals, AF, (bearing not included) |
1169 | 2,00 | Bumper, gate - small, medium series |
1170 | 0,76 | Spring, bumper |
1172 | 95,38 | Reverse gate only, cam, large - no hardware - specify color |
1173 | 124,36 | Gate assy with roller, large - used with cam - specify color |
1175 | 87,97 | Reverse gate only, cam, medium - no hardware - specify color |
1175,1 | 87,97 | Reverse gate only, EF, cam, - no hardware - specify color |
1176 | 117,33 | Gate assy with roller, medium - used with cam - specify color |
1177 | 1,43 | Wave washer spring, gate pivot 3/8 |
1178 | 1,43 | Wave washer spring, gate pivot 1/2 |
1181 | 20,90 | Intake fin, large, left hand |
1182 | 20,90 | Intake fin, large, right hand |
1183 | 19,95 | Intake fin, medium, left hand |
1184 | 19,95 | Intake fin, medium, right hand |
1185 | 59,57 | Water intake fin kit, medium |
1186 | 62,99 | Water intake fin kit, large |
1187 | 3,99 | Grill rod, fin, medium, 2/unit |
1188 | 4,28 | Grill rod, fin, large, 2/unit |
1199 | 2,38 | Pivot, cable end |
1200 | 49,97 | Shift rod assy, AE, with shift lever |
1203 | 290,61 | Driveshaft only RX (extra long), (see assy #1204) |
1204 | 633,84 | Driveshaft assembled in bearing carrier RX, uses 1/4 bolts |
1204,1 | 633,84 | Same as assy #1204 except uses 5/16 mounting bolts |
1207 | 290,61 | Driveshaft only AAX (extra long), (see assy #1208) |
1208 | 633,84 | Driveshaft assembled in bearing carrier AAX, uses 1/4 bolts |
1208,1 | 633,84 | Same as assy #1208 except uses 5/16 mounting bolts |
1211 | 305,14 | Driveshaft only SX (extra long), (see assy #1212) |
1212 | 648,00 | Driveshaft assembled in bearing carrier SX, uses 1/4 bolts |
1212,1 | 648,00 | Same as assy #1212 except uses 5/16 mounting bolts |
1213 | 11,31 | Shift rod only, Z40SM, (see assy #1215) |
1214 | 11,31 | Shift lever, ZM |
1215 | 53,58 | Shift rod assy, Z40SM, with shift lever |
1216 | 201,12 | Cam gate backfit, ZLM, (1217 & 1222), replaces transom shifter, 970 |
1217 | 55,01 | Shift rod assy, Z40LM, with shift lever |
1220 | 219,45 | Driveshaft only 60° R6, (see assy #1221) |
1221 | 562,69 | Driveshaft assembled in bearing carrier 60° R6, uses 1/4 bolts |
1221,1 | 562,69 | Same as assy #1221 except uses 5/16 mounting bolts |
1222 | 145,16 | Cam gate backfit kit, medium series, includes gate & linkage - specify color |
1222,2 | 143,93 | Cam gate backfit kit, small series, includes gate & linkage - specify color |
1223 | 152,86 | Cam gate backfit kit, large series, includes gate & linkage - specify color |
1226 | 686,47 | Main housing with exhaust tube AG, no reverse gate |
1229 | 179,46 | Driveshaft only AG long, (see assy #1230) |
1230 | 420,76 | Driveshaft assembled in bearing carrier AGL, uses 1/4 bolts |
1230,1 | 420,76 | Same as assy #1230 except uses 5/16 mounting bolts |
1231 | 3,04 | Shift rod pilot, AG |
1232 | 199,41 | Cam gate backfit, ZSM, (1215 & 1222), replaces transom shifter, 969 |
1233 | 11,31 | Shift lever, Q, cam gate |
1234 | 11,31 | Shift rod, Q, cam gate, (see assy #1235) |
1235 | 53,58 | Shift rod assy, Q, cam gate, with shift lever |
1236 | 18,15 | Shift rod, QL, long, cam gate, (see assy #1237) |
1237 | 55,01 | Shift rod assy, QL, long, cam gate, with shift lever |
1238 | 1,90 | Spacer, intake fin, 4/unit |
1241 | 219,45 | Driveshaft only R92, (see assy #1242) |
1242 | 562,69 | Driveshaft assembled in bearing carrier R92, uses 1/4 bolts |
1242,1 | 562,69 | Same as assy #1242 except uses 5/16 mounting bolts |
1246 | 178,41 | Driveshaft only AG short, (see assy #1247) |
1247 | 419,52 | Driveshaft assembled in bearing carrier AGS, uses 1/4 bolts |
1247,1 | 419,52 | Same as assy #1247 except uses 5/16 mounting bolts |
1249 | 178,41 | Driveshaft only AGF70, (see assy #1250) |
1250 | 419,52 | Driveshaft assembled in bearing carrier AGF70, uses 1/4 bolts |
1250,1 | 419,52 | Same as assy #1250 except uses 5/16 mounting bolts |
1251 | 2,00 | Bushing, V adapter, 4/unit |
1252 | 10,55 | Shift lever, Z30, cam gate |
1255 | 175,66 | Driveshaft only ZS30, with key #1275, (see assy #1256) |
1256 | 353,69 | Driveshaft assembled in bearing carrier ZS30 with key #1275 |
1257 | 13,49 | Shift lever, U4, cam gate |
1258 | 8,36 | Cable anchor, port side, AG |
1259 | 24,61 | Block, AGC shift cable assy |
1260 | 3,61 | Sleeve, AGC shift cable assy |
1261 | 80,47 | Shift cable assy, Z30SM |
1263 | 104,03 | Shift cable assy, E, F, P, G, AG short |
1264 | 107,64 | Shift cable assy, E, F, P, G, AC, AG long |
1265 | 3,61 | Shift guide rod, AC |
1269 | 290,61 | Driveshaft only 60° R6X, (extra long), (see assy #1270) |
1270 | 633,84 | Driveshaft assembled in bearing carrier 60° R6X, uses 1/4 bolts |
1270,1 | 633,84 | Same as assy #1270 except uses 5/16 mounting bolts |
1273 | 290,61 | Driveshaft only R92X (extra long), (see assy #1274) |
1274 | 633,84 | Driveshaft assembled in bearing carrier R92X, uses 1/4 bolts |
1274,1 | 633,84 | Same as assy #1274 except uses 5/16 mounting bolts |
1275 | 2,66 | Tee key - water pump, Z, AH, AJ |
1277 | 176,04 | Driveshaft only AF93S, (see assy #1278) |
1278 | 354,54 | Driveshaft assembled in bearing carrier AF93S |
1280 | 177,46 | Driveshaft only AF93L, (see assy #1281) |
1281 | 356,16 | Driveshaft assembled in bearing carrier AF93L |
1282 | 55,67 | Shift rod assy, U4S cam gate, with shift lever |
1283 | 57,00 | Shift rod assy, U4L cam gate, with shift lever |
1284 | 2,38 | Spring, T bar handle |
1285 | 3,33 | Guide tube, T bar handle |
1288 | 176,04 | Driveshaft only AHS, with key #1275, (see assy #1289) |
1289 | 354,54 | Driveshaft assembled in bearing carrier AHS with key #1275 |
1290 | 106,59 | Adapter plate, AH |
1291 | 49,12 | Pump adapter, AH |
1292 | 11,31 | Shift lever, AHM |
1293 | 2,38 | Spring - shift booster, AHM |
1294 | 12,16 | Shift rod, AHM |
1295 | 55,67 | Shift rod assy, AHM, complete with shift lever |
1298 | 578,65 | Main housing with exhaust tube, AH, no reverse gate |
1299 | 673,84 | Main housing with gate and linkage, AH |
1300 | 1,43 | Stud - intake 1/4, (6 required) |
1303 | 167,58 | Driveshaft only AI, (see assy #1304) |
1304 | 337,44 | Driveshaft assembled in bearing carrier AIS |
1305 | 101,37 | Adapter plate, AI |
1306 | 46,65 | Pump adapter, AI |
1309,05 | 550,53 | Main housing with exhaust tube, AI, no reverse gate |
1310,05 | 640,97 | Main housing with gate and linkage, AI |
1311 | 6,84 | Shift lever, AI |
1313 | 133,57 | Bearing carrier with seals, AH, (bearing not included) |
1315 | 133,57 | Bearing carrier with seals, AI, (bearing not included) |
1316 | 49,12 | Cable block for shifter assy Z, Y, tiller steering |
1317 | 121,03 | Shift cable assy Z, Y, tiller steering |
1318 | 81,04 | Shift cable assy AIR, remote control |
1319 | 1,52 | Stud - intake 5/16, (6 required) |
1322 | 178,41 | Driveshaft only ZL30, with key #1275, (see assy #1323) |
1323 | 356,54 | Driveshaft assembled in bearing carrier ZL30 with key #1275 |
1326 | 248,90 | Intake painted 5 7/8, 6 1/8 for flanged liner |
1329 | 12,35 | Stud/nut set of 6 with locktite, medium series |
1332 | 293,17 | Intake painted 7 3/8 for flanged liner |
1333 | 380,95 | Intake assy 7 3/8 with flanged liner & grill bars - specify color |
1335 | 13,68 | Stud/nut set of 6 with locktite, large series |
1336 | 10,45 | Shift lever V side shift |
1337 | 2,38 | Spacer, V side shift |
1339 | 179,46 | Driveshaft only AD70, (see assy #1340) |
1340 | 419,05 | Driveshaft assembled in bearing carrier AD70, uses 1/4 bolts |
1340,1 | 419,05 | Same as assy #1340 except uses 5/16 mounting bolts |
1341 | 9,03 | Shift lever ADC70 |
1342 | 85,12 | Shift cable assy ADC70 |
1345 | 178,98 | Driveshaft only AHL, with key #1275, (see assy #1346) |
1346 | 357,39 | Driveshaft assembled in bearing carrier AHL key #1275 |
1347 | 8,17 | Tilt latch assy V short side shift |
1347,1 | 8,17 | Tilt latch assy V long side shift |
1348 | 36,20 | Shift rod assy V short side shift |
1348,1 | 36,20 | Shift rod assy V long side shift |
1349 | 12,16 | Shift rod V short side shift, 17 5/8 |
1349,1 | 12,16 | Shift rod V long side shift, 21 3/4 |
1355 | 85,22 | Reverse gate only, cam, small - no hardware - specify color |
1356 | 114,57 | Gate assy with roller, small - used with cam - specify color |
1357 | 11,31 | Shift lever, AE, cam |
1360 | 169,01 | Driveshaft only AIL, (see assy #1361) |
1361 | 338,77 | Driveshaft assembled in bearing carrier AIL |
1363 | 134,33 | Driveshaft only VS side shift, (see assy #1364) |
1364 | 327,37 | Driveshaft assembled in bearing carrier VS side shift |
1366 | 147,06 | Adapter plate, AJ |
1369 | 578,65 | Main housing with exhaust tube, AJ, no reverse gate |
1370 | 673,84 | Main housing with gate and linkage, AJ |
1371 | 3,33 | Rod end bent V side shift |
1372 | 5,89 | Mercury handle modified V side shift |
1375 | 176,04 | Driveshaft only AJS, with key #1275, (see assy #1376) |
1376 | 354,54 | Driveshaft assembled in bearing carrier AJS with key #1275 |
1377 | 6,27 | Water tube extension, AJ, with O ring, #530 |
1378 | 3,99 | Shift rod guide, AJ |
1380 | 133,57 | Bearing carrier with seals, AJ, (bearing not included) |
1382 | 64,98 | Shift cable assy, AJSM |
1383 | 66,31 | Shift cable assy, AJLM, Y series starting 1997 |
1384 | 91,87 | Adapter plate, AE40 |
1385 | 55,67 | Shift rod assy, AE, cam gate, complete with shift lever |
1388 | 142,22 | Driveshaft only AE40, short, (see assy #1389) |
1389 | 342,57 | Driveshaft assembled in bearing carrier AE40 short |
1390 | 106,59 | Adapter plate, AK |
1391 | 4,28 | Shift rod guide, AK |
1392 | 4,56 | Water tube extension, AK |
1395 | 578,65 | Main housing with exhaust tube, AK, no reverse gate |
1396 | 673,84 | Main housing with gate and linkage, AK |
1399 | 176,04 | Driveshaft only AK, short, (see assy #1400) |
1400 | 354,54 | Driveshaft assembled in bearing carrier, AK short |
1402 | 133,57 | Bearing carrier with seals, AK, (bearing not included) |
1405 | 11,31 | Shift arm, AK |
1408 | 177,46 | Driveshaft only AK, long, (see assy #1409) |
1409 | 355,97 | Driveshaft assembled in bearing carrier, AK long |
1410 | 80,47 | Shift cable assy, AK, short |
1411 | 82,94 | Shift cable assy, AK, long |
1412 | 19,95 | Intake fin, small, left hand |
1413 | 19,95 | Intake fin, small, right hand |
1414 | 147,25 | Adapter plate, AL |
1418 | 691,13 | Main housing with exhaust tube, AL, no reverse gate |
1419 | 818,52 | Main housing with gate and linkage, AL |
1420 | 4,28 | Grill rod, fin, small, 2/unit |
1423 | 143,55 | Driveshaft only AE40 long, (see assy #1424) |
1424 | 343,81 | Driveshaft assembled in bearing carrier, AE40 long |
1425 | 50,54 | Pump adapter, AL |
1428 | 212,99 | Driveshaft only AL, (see assy #1429) |
1429 | 498,94 | Driveshaft assembled in bearing carrier, AL, uses 1/4 bolts |
1429,1 | 498,94 | Same as assy #1429 except uses 5/16 mounting bolts |
1431 | 51,68 | Liner flanged, 7 3/8 |
1435 | 177,46 | Driveshaft only AJ long, with key #1275, (see assy #1436) |
1436 | 355,97 | Driveshaft assembled in bearing carrier, AJ long with key #1275 |
1440 | 305,14 | Driveshaft only XDX, extra long, (see assy #1441) |
1441 | 648,00 | Driveshaft assembled in bearing carrier, XDX, uses 1/4 bolts |
1441,1 | 648,00 | Same as assy #1441 except uses 5/16 mounting bolts |
1444 | 177,46 | Driveshaft only AJL44-14T 4 stroke, with key #1275, (see assy #1445) |
1445 | 355,97 | Driveshaft assembled in bearing carrier, AJL44-14T 4 stroke with key #1275 |
1446 | 258,88 | Intake 5 7/8, 6 1/8 for flanged liner, with grill bars, without liner |
1447 | 305,43 | Intake assy 6 1/8 with flanged liner & grill bars - specify color |
1448 | 305,43 | Intake assy 5 7/8 with flanged liner & grill bars - specify color |
1450 | 216,13 | Driveshaft only AN 4 stroke, (see assy #1451) |
1451 | 561,74 | Driveshaft assembled in bearing carrier, AN 4 stroke, uses 1/4 bolts |
1451,1 | 561,74 | Same as assy #1451 except uses 5/16 mounting bolts |
1453 | 106,59 | Adapter plate, AM |
1456 | 578,65 | Main housing with exhaust tube, AM, no reverse gate |
1457 | 673,84 | Main housing with gate and linkage, AM |
1460 | 177,46 | Driveshaft only AM short, (see assy #1461) |
1461 | 355,97 | Driveshaft assembled in bearing carrier, AM short |
1472 | 133,57 | Bearing carrier with seals, AM, (bearing not included) |
1473 | 7,22 | Shift arm, AM |
1474 | 11,31 | Shaft - handle, AM |
1475 | 5,99 | Pin - shift rod, AM |
1476 | 7,22 | Water tube extension, AM |
1477 | 9,12 | Shaft shield, AM |
1478 | 45,32 | Shift rod cutoff clamp tool, AM |
1479 | 80,47 | Shift cable assy, AM, short |
1480 | 82,94 | Shift cable assy, AM, long |
1483 | 178,70 | Driveshaft only AM long, (see assy #1484) |
1484 | 357,30 | Driveshaft assembled in bearing carrier, AM long |
1485 | 5,70 | Wedge stud, AN |
1486 | 14,73 | Wedge bolt, AN |
1489,05 | 686,47 | Main housing with exhaust tube, AN, no reverse gate |
1490,05 | 808,74 | Main housing with gate and linkage, AN |
1491 | 57,19 | Shift rod assy, AEL, cam gate, complete with shift lever |
1494 | 183,83 | Driveshaft only AK long, 4 stroke, (see assy #1495) |
1495 | 362,43 | Driveshaft assembled in bearing carrier, AK long 4 stroke |
1496 | 2,00 | Water pump gasket - AK |
1497 | 2,00 | Gate bumper - large series |
1498 | 6,46 | Exhaust tube clip kit with #845, 846, 847, 621(2) |
1499 | 15,49 | Bracket, cable support, AP-Evinrude |
1502 | 329,37 | Intake 7 3/8 for flanged liner, with grill bars, without liner |
1506 | 179,46 | Driveshaft only Y/E48 Enduro, (see assy #1507.1) |
1507,1 | 419,05 | Driveshaft assembled in bearing carrier Y/E48, uses 5/16 bolts |
1519 | 122,74 | Urethane bonded flanged liner 7 3/8 |
1521 | 49,02 | Flanged liner 6 1/8 |
1525 | 41,80 | Transom bracket-left hand 20 |
1526 | 41,80 | Transom bracket-right hand 20 |
1527 | 58,43 | Motor bracket-left hand |
1528 | 58,43 | Motor bracket-right hand |
1529 | 17,96 | Splash plate - propeller |
1530 | 13,11 | Tie rod (2 required) |
1531 | 9,69 | Spacer tube (2 required) |
1533 | 5,13 | Transom upper position rod 1/4 |
1534 | 5,89 | Spacer, 7305 brg (replaces #831 when used with #404) |
1535 | 5,61 | Spacer, 7205 brg (replaces #833 when used with #1536) |
1536 | 3,99 | Backup washer 7205 brg (used with #1535) |
1537 | 147,25 | Adapter plate, AP |
1540,02 | 684,76 | Main housing with exhaust tube, AP-Suzuki, no reverse gate |
1540,03 | 684,76 | Main housing with exhaust tube, AP-Evinrude, no reverse gate |
1541,02 | 812,06 | Main housing with gate and linkage, AP-Suzuki |
1541,03 | 812,06 | Main housing with gate and linkage, AP-Evinrude |
1542 | 50,54 | Pump adapter, AP |
1545 | 219,45 | Driveshaft only AP, (see assy #1546.1) |
1546,1 | 509,77 | Driveshaft assembled in bearing carrier AP, uses 5/16 bolts |
1547 | 94,15 | Neutral cable assembly, AP-Evinrude |
1548 | 32,02 | Shift handle adapter kit VSS cam gate |
1549 | 85,50 | Water pump kit, AN130 |
1555 | 19,00 | Splash brkt - right hand |
1556 | 19,00 | Splash brkt - left hand |
1557 | 27,55 | Splash plate |
1558 | 21,66 | Splash flap |
1562 | 219,45 | Driveshaft only Y100-4, (see assy #1563.1) |
1563,1 | 516,61 | Driveshaft assembled in bearing carrier Y100-4, uses 5/16 bolts |
1564 | 19,67 | OMC cable adapter for Morse 33C cable |
1565 | 1,52 | Adhesive foam strip |
1566 | 68,69 | Shift cable assy, Y100-4 |
1566,1 | 72,39 | Shift cable assy, AJS-43 |
1566,3 | 64,70 | Neutral cable assembly, AA115 |
1567 | 3,04 | Screw-rod end Y100-4 |
1568 | 1,90 | Shim washer, large, Y100-4 |
1569 | 1,52 | Shim washer, small, Y100-4 |
1570 | 439,09 | Transom bracket |
1571 | 0,76 | Rubber cap - 1/4 rod (2 required) |
1580 | 176,04 | Driveshaft only U4S-4, (see assy #1581) |
1581 | 354,54 | Driveshaft assembled in bearing carrier U4S-4 |
1584 | 177,46 | Driveshaft only U4L-4, (see assy #1585) |
1585 | 356,35 | Driveshaft assembled in bearing carrier U4L-4 |
1588 | 176,04 | Driveshaft only AK-43, (see assy #1589) |
1589 | 354,54 | Driveshaft assembled in bearing carrier AK-43 |
1591 | 10,26 | Shift lever, U4-4 tiller |
1592 | 96,81 | Tiller cable assy U4-4 |
1594 | 17,10 | Lever mount, U4-4 |
1597 | 177,46 | Driveshaft only AKL-43, (see assy #1598) |
1598 | 355,97 | Driveshaft assembled in bearing carrier AKL-43 |
1602 | 322,81 | Intake casing only, 7 5/8, (see assy 1603) - specify color |
1603 | 439,09 | Intake assy 7 5/8, with grill bars & flanged liner - specify color |
1605 | 64,70 | Flanged liner 7 5/8 |
1609 | 710,22 | Main housing with exhaust tube, AQ, no reverse gate |
1610 | 839,42 | Main housing with gate and linkage, AQ |
1611 | 167,87 | Adapter plate, AQ |
1614 | 232,47 | Driveshaft only AQ, (see assy #1615.1) |
1615,1 | 574,66 | Driveshaft assembled in bearing carrier AQ, uses 5/16 bolts |
1618 | 225,91 | Driveshaft only AN-4M, (see assy #1619.1) |
1619,1 | 516,61 | Driveshaft assembled in bearing carrier AN-4M, uses 5/16 bolts |
1620 | 5,70 | Wedge stud, AN-4M |
1621 | 3,61 | Shift guide, AN-4M |
1622 | 3,99 | Grill bar/ea, 7 5/8 intake - sold individually, 10 equals complete set |
1625 | 710,22 | Main housing with exhaust tube, AR, no reverse gate |
1626 | 839,42 | Main housing with gate and linkage, AR |
1627 | 167,87 | Adapter plate, AR |
1630 | 232,47 | Driveshaft only AR, (see assy #1631.1) |
1631,1 | 574,66 | Driveshaft assembled in bearing carrier AR, uses 5/16 bolts |
1632 | 3,61 | Shift guide, AR |
1634 | 11,69 | Water tube extension, AR, with #525.1 O ring |
1635 | 3,80 | Anode - for all intakes, (see kit #1693) |
1643 | 177,08 | Driveshaft only AJS-43, (see assy #1644) |
1644 | 354,54 | Driveshaft assembled in bearing carrier AJS-43 |
1647 | 178,13 | Driveshaft only AJL-43, (see assy #1648) |
1648 | 355,87 | Driveshaft assembled in bearing carrier AJL-43 |
1649 | 2,47 | Spacer - water tube, AJ-43 |
1650 | 2,00 | Cushion - shift rod guide, AJ-43 |
1651 | 6,27 | Shift rod guide, AJ-43 |
1655 | 232,47 | Driveshaft only AA115-4, (see assy #1656.1) |
1656,1 | 574,66 | Driveshaft assembled in bearing carrier AA115-4 |
1657 | 13,02 | Shift lever, AKC-43 |
1658 | 6,37 | Spacer - shift lever, AKC-43 |
1659 | 80,47 | Shift cable assy, AKC-43 |
1660 | 82,94 | Shift cable assy, AKCL-43 |
1661 | 3,33 | Shift rod guide, AN |
1664 | 239,02 | Driveshaft only ARXL, (see assy #1665.1) |
1665,1 | 581,12 | Driveshaft assembled in bearing carrier ARXL |
1666 | 8,08 | Offset plate, AR |
1667 | 3,33 | Grill rod/ea, 7 5/8 intake - (2 required) |
1675 | 179,55 | Driveshaft only Y/E48S, (see assy #1676.1) |
1676,1 | 419,62 | Driveshaft assembled in bearing carrier Y/E48S |
1678 | 49,02 | Flanged liner 5 7/8 |
1681 | 135,00 | Urethane bonded flanged liner 7 5/8 |
1686 | 839,42 | Main housing with gate and linkage, RP |
1690 | 710,22 | Main housing with exhaust tube, SP, no reverse gate |
1691 | 839,42 | Main housing with gate and linkage, SP |
1693 | 6,27 | Anode kit, (two bolts #587.3, and flat washers #635) |
1695 | 178,13 | Driveshaft only AJL-44-16T, (see assy #1696) |
1696 | 356,35 | Driveshaft assembled in bearing carrier AJL-44-16T |
1699 | 710,22 | Main housing with exhaust tube, AA6P, no reverse gate |
1700 | 839,42 | Main housing with gate and linkage, AA6P |
1701 | 374,49 | Intake 7 5/8 for flanged liner, w/ grill bars, without liner |
1705 | 3,80 | Tee key, impeller, 5/8 dia. shaft, medium, 1/2 round |
1706 | 4,56 | Tee key, impeller, 3/4 dia. shaft, large, 1/2 round |
1711 | 179,55 | Driveshaft only AGL-44, (see assy #1712) |
1712,1 | 421,04 | Driveshaft assembled in bearing carrier AGL-44, uses 5/16 bolts |
1715 | 216,98 | Driveshaft only ACL-44, (see assy #1716) |
1716,1 | 507,30 | Driveshaft assembled in bearing carrier ACL-44, uses 5/16 bolts |
1717 | 97,95 | Tiller cable assembly, AP-S70 |
1718 | 4,18 | Torsional Damper kit, 5/8, (includes 1703 (1 ea), & 1707 (2 ea) |
1719 | 4,47 | Torsional Damper kit, 3/4, (includes 1704 (1 ea), & 1708 (2 ea) |
1721 | 374,11 | Impeller 7 5/8 V6 stainless steel, w/sleeve 136 & 2 tee keys 1706 |
1722 | 7,60 | Stud, front, model S, SP, 25 |
1723 | 22,80 | Intake fin, ex-large, 7 5/8, left hand |
1724 | 22,80 | Intake fin, ex-large, 7 5/8, right hand |
1725 | 4,28 | Grill rod, fin, ex-large, 7 5/8, 2/unit |
1726 | 66,41 | Water intake fin kit,ex-large, 7 5/8 |
1729 | 239,02 | Driveshaft only AQX, (see assy #1730.1) |
1730,1 | 581,12 | Driveshaft assembled in bearing carrier AQX, uses 5/16 bolts |
1732 | 225,91 | Driveshaft only ANX, (see assy #1733.1) |
1733,1 | 568,10 | Driveshaft assembled in bearing carrier ANX, uses 5/16 bolts |
1735 | 374,11 | Impeller 7 5/8 V6 CB stainless steel, w/sleeve 136 & 2 tee keys 1706 |
1737 | 336,59 | Impeller 6 1/8 stainless steel, w/sleeve 36.1 & 2 tee keys 1705 |
1738 | 374,11 | Impeller 7 3/8 V6 stainless steel, w/sleeve 136 & 2 tee keys 1706 |
1739 | 374,11 | Impeller 7 3/8 V6 CB stainless steel, w/sleeve 136 & 2 tee keys 1706 |
1743,05 | 710,22 | Main housing with exhaust tube, AV, no reverse gate |
1744,05 | 839,42 | Main housing with gate and linkage, AV |
1745 | 167,87 | Adapter plate, AV |
1748 | 232,47 | Driveshaft only AV, (see assy #1749.1) |
1749,1 | 574,66 | Driveshaft assembled in bearing carrier AV, uses 5/16 bolts |
1750 | 9,12 | Water tube extension, AV, with O ring #532.1 |
1751 | 7,03 | Shaft shim |
1752 | 8,74 | Wedge bolt AV |
1753 | 5,70 | Taper lock stud AV |
1754 | 82,46 | Neutral cable assembly, AV, AP-S |
1756 | 374,11 | Impeller 7 3/8 stainless steel 3 blade, w/sleeve 136 & 2 tee keys 1706 |
1758 | 219,45 | Driveshaft only AP90-140, 20 inch (see assy #1759.1) |
1759,1 | 509,96 | Driveshaft assembled in bearing carrier AP90-140, uses 5/16 bolts |
1761 | 225,91 | Driveshaft only APX90-140, 25 inch (see assy #1762.1) |
1762,1 | 516,61 | Driveshaft assembled in bearing carrier APX90-140, uses 5/16 bolts |
1763 | 147,25 | Adapter plate, AP90-140 |
1766 | 239,02 | Driveshaft only AVX, (see assy #1767.1) |
1767,1 | 581,12 | Driveshaft assembled in bearing carrier AVX, uses 5/16 bolts |
1770,02 | 710,22 | Main housing with exhaust tube, APP, no reverse gate |
1771,02 | 839,42 | Main housing with gate and linkage, APP |
1773 | 290,61 | Driveshaft only AA115-4X, (see assy #1774.1) |
1774,1 | 633,84 | Driveshaft assembled in bearing carrier AA115-4X, uses 5/16 bolts |
1776 | 142,22 | Driveshaft only AE4-30, (see assy #1777) |
1777 | 342,57 | Driveshaft assembled in bearing carrier AE4-30 |
1778 | 11,31 | Shift lever AE4-30 |
1779 | 18,15 | Shift rod AE4-30 21 1/4 Long |
1780 | 6,37 | Shift guide rod, AE4-30 |
1781 | 6,37 | Shift guide bushing AE4-30 |
1782 | 91,87 | Adapter plate AE4-30 |
1785 | 216,13 | Driveshaft only AC OPT, (see assy #1786.1) |
1786,1 | 506,54 | Driveshaft assembled in bearing carrier AC OPT, uses 5/16 bolts |
1788 | 305,14 | Driveshaft only AC OPTX, (see assy #1789.1) |
1789,1 | 512,81 | Driveshaft assembled in bearing carrier AC OPTX, uses 5/16 bolts |
1791 | 219,26 | Driveshaft only ALX, (see assy #1792.1) |
1792,1 | 569,91 | Driveshaft assembled in bearing carrier ALX, uses 5/16 bolts |
1793 | 55,67 | Shift rod assy, AE4M-30, with shift lever |
1794 | 18,15 | Shift rod AE4L-30 25 Long |
1795 | 55,86 | Shift rod assy AE4L-30 |
1797 | 148,30 | Driveshaft only AE4L-30, (see assy #1798) |
1798 | 348,94 | Driveshaft assembled in bearing carrier AE4-30L |
1800 | 225,91 | Driveshaft only AN-4MX, (see assy #1801.1) |
1801,1 | 516,61 | Driveshaft assembled in bearing carrier AN-4MX, uses 5/16 bolts |
1803 | 179,46 | Driveshaft only Y70-04, (see assy #1804.1) |
1804,1 | 419,05 | Driveshaft assembled in bearing carrier Y70-04, uses 5/16 bolts |
1806 | 216,13 | Driveshaft only ACX, (see assy #1807.1) |
1807,1 | 506,54 | Driveshaft assembled in bearing carrier ACX, uses 5/16 bolts |
1808 | 19,67 | Merc cable adapter |
1809 | 3,33 | Pivot-Merc neutral cable |
1810 | 83,41 | Merc neutral switch cable assy |
1813 | 710,22 | Main housing with exhaust tube, AW, no reverse gate |
1814 | 818,52 | Main housing with gate and linkage, AW |
1815 | 81,04 | Neutral switch cable assembly, AW |
1816 | 167,87 | Adapter plate AY |
1819 | 710,22 | Main housing with exhaust tube, AY, no reverse gate |
1820 | 818,52 | Main housing with gate and linkage, AY |
1822 | 219,45 | Driveshaft only AY, (see assy #1823.1) |
1823,1 | 562,69 | Driveshaft assembled in bearing carrier AY, uses 5/16 bolts |
1824 | 3,23 | Shift lever AI Honda |
1826 | 177,46 | Driveshaft only ABL-03, (see assy #1827) |
1827 | 356,16 | Driveshaft assembled in bearing carrier ABL-03 |
1828 | 79,23 | Shift cable assy Honda tiller start 2004 15 inch |
1829 | 80,37 | Shift cable assy Honda tiller start 2004 20 inch |
1831 | 51,68 | Flanged liner 7 3/16 |
1833 | 51,68 | Flanged liner 6 7/8 |
1834 | 5,70 | Wedge stud, R |
1835 | 5,70 | Wedge stud, L |
1837 | 179,46 | Driveshaft only L60L04, (see assy #1838.1) |
1838,1 | 420,76 | Driveshaft assembled in bearing carrier L60L04, 5/16 bolts |
1839 | 374,11 | Impeller 7 3/16 stainless steel, w/sleeve 136 & 2 tee keys 1706 |
1840 | 380,95 | Intake assy 7 3/16 with flanged liner & grill bars - specify color |
1841 | 5,70 | Wedge stud, AB |
1851 | 15,01 | Cable end Yamaha 2006 tiller |
1853 | 179,55 | Driveshaft only AGS-44, (see assy #1854.1) |
1854,1 | 421,04 | Driveshaft assembled in bearing carrier AGS-44, 5/16 bolts |
1855 | 380,95 | Intake assy 6 7/8 with flanged liner & grill bars - specify color |
1856 | 63,37 | Shift cable assy Yamaha 2006, short |
1857 | 64,89 | Shift cable assy Yamaha 2006, long |
1858 | 3,33 | Pin, dowel, ETEC |
1867 | 54,06 | Shift cable assy Honda, 75-90 hp |
1868 | 4,56 | Stud plate, BRP, tiller |
1869 | 9,69 | Cable anchor morse formed, BRP, tiller |
1870 | 79,23 | Shift cable assy BRP, 2006, short |
1871 | 80,37 | Shift cable assy BRP, 2006, long |
1873 | 142,22 | Driveshaft only AE long (see assy # 1874) |
1874 | 342,57 | Driveshaft assembled in bearing carrier AE long |
1875 | 108,30 | Adapter plate, BA |
1876 | 10,26 | Shift rod guide, BA |
1877 | 8,55 | Water tube extension, BA, with O ring, #532.2 |
1878 | 15,01 | Exhaust plate, BA |
1881 | 551,10 | Main housing with exhaust tube, BA, no reverse gate |
1882 | 636,50 | Main housing with gate and linkage, BA |
1884 | 127,78 | Bearing carrier with seals, BA, (bearing not included) |
1886 | 134,33 | Driveshaft only BA short, with key #1275, (see assy # 1887) |
1887 | 327,37 | Driveshaft assembled in bearing carrier BA short, with key #1275, |
1888 | 80,47 | Shift cable assy, BA, short |
1919 | 374,11 | Impeller 7 3/8 D stainless steel, 4 blade, w/sleeve 136 & 2 tee keys 1706 |
1929 | 219,45 | Driveshaft only AYX, (see assy #1930.1) |
1930,1 | 562,69 | Driveshaft assembled in bearing carrier AYX, uses 5/16 bolts |
1952 | 216,13 | Driveshaft only AN-4M 20T, (see assy #1953.1) |
1953,1 | 506,54 | Driveshaft assembled in bearing carrier AN-4M 20T, uses 5/16 bolts |
1954 | 84,36 | Shift cable assy AH tiller, 2006 |
1979,05 | 686,47 | Main housing with exhaust tube, BE, no reverse gate |
1980,05 | 808,74 | Main housing with gate and linkage, BE |
1981 | 48,17 | Pump Adapter, BE |
1983 | 216,13 | Driveshaft only BE, (see assy #1984.1) |
1984,1 | 506,54 | Driveshaft assembled in bearing carrier BE, uses 5/16 bolts |
1985 | 3,61 | Front dowel, BE |
1996 | 134,33 | Driveshaft only BA long, with key #1275, (see assy # 1997) |
1997 | 327,37 | Driveshaft assembled in bearing carrier BA long, with key #1275, |
2000 | 686,47 | Main housing with exhaust tube, BF, no reverse gate |
2001 | 812,06 | Main housing with gate and linkage, BF |
2002 | 106,59 | Adapter plate, BF |
2004 | 178,41 | Driveshaft only BF, (see assy #2005.1) |
2005,1 | 419,52 | Driveshaft assembled in bearing carrier BF, 5/16 bolts |
2009 | 163,21 | Bearing carrier with seals, BF, 5/16 mounting bolts |
2010 | 80,47 | Shift cable assy BFC |
2011 | 8,55 | Cable anchor BFC |
2012 | 5,70 | Wedge stud, S, SP |
2013 | 1,90 | Cable end bushing 1/4 to #10 |
2017 | 108,78 | Shift cable assy ABCL03 ETEC (40 hp only) |
2019 | 277,78 | Driveshaft only Y100-4X, (see assy #2020.1) |
2020,1 | 575,89 | Driveshaft assembled in bearing carrier Y100-4X, uses 5/16 bolts |
2029 | 219,45 | Driveshaft only BH, (see assy #2030.1) |
2030,1 | 509,96 | Driveshaft assembled in bearing carrier BH, uses 5/16 bolts |
2033 | 686,47 | Main housing with exhaust tube, BH, no reverse gate |
2034 | 808,74 | Main housing with gate and linkage, BH |
2035 | 147,25 | Adapter plate, BH |
2036 | 15,01 | Cable End BH 2009 Tiller |
2037 | 3,99 | Shift rod guide, BH |
2038 | 2,85 | Gasket water pump BH |
2039 | 63,37 | Shift cable assy BH, tiller steering |
2040 | 15,77 | Tiller shift cable bracket AC Optimax |
2041 | 23,09 | Pivot AC Optimax tiller |
2042 | 1,90 | Shift rod guide AJ-43 EFI 2009 |
2043 | 117,33 | Shift cable assy for AC Mercury Optimax tiller 896648A05 |
2047 | 578,65 | Main housing with exhaust tube, BI, no reverse gate |
2048 | 673,84 | Main housing with gate and linkage, BI |
2049 | 106,59 | Adapter plate, BI |
2051 | 177,46 | Driveshaft only BI short, (see assy # 2052) |
2052 | 355,97 | Driveshaft assembled in bearing carrier BI short |
2053 | 9,12 | Water tube extension, BI, with #532.2 O ring |
2054 | 80,47 | Shift cable assy BI, tiller steering |
2056 | 177,46 | Driveshaft only BI long, (see assy # 2057) |
2057 | 355,97 | Driveshaft assembled in bearing carrier BI long |
2058 | 15,01 | Exhaust baffle BE60 |
2060 | 179,46 | Driveshaft only BE60, (see assy #2061.1) |
2061,1 | 419,52 | Driveshaft assembled in bearing carrier BE60, 5/16 bolts |
2062 | 15,77 | Cable anchor, BE60 |
2063 | 16,34 | Rod end, BE60 |
2064 | 95,57 | Shift cable assy, BE60, tiller steering |
2069 | 177,46 | Driveshaft only U4L-60, (see assy # 2070) |
2070 | 356,35 | Driveshaft assembled in bearing carrier U4L-60 |
2089 | 81,89 | Shift cable assy, BA long |
2090 | 10,26 | Shift rod guide, BA |
2093 | 578,65 | Main housing with exhaust tube, BL, no reverse gate |
2094 | 673,84 | Main housing with gate and linkage, BL |
2095 | 7,41 | Water tube extension, BL, with #530 O ring |
2100 | 177,46 | Driveshaft only U4S-60, (see assy # 2101) |
2101 | 356,35 | Driveshaft assembled in bearing carrier U4S-60 |
2102 | 54,53 | Water intake fin kit, small |
2104 | 134,33 | Driveshaft only BM, (see assy # 2105) |
2105 | 327,37 | Driveshaft assembled in bearing carrier BM |
2106 | 91,87 | Adapter plate, BM |
2107 | 50,16 | Pump adapter, BM |
2110 | 551,10 | Main housing with exhaust tube, BM, no reverse gate |
2111 | 627,10 | Main housing with gate and linkage, BM |
2113 | 127,78 | Bearing carrier with seals, BM, (bearing not included) |
2114 | 4,28 | Shift rod guide, BM |
2115 | 5,70 | Neutral stop - transom mount shift cable assy - cam |
2116 | 131,29 | Shift cable assy - transom mount, cam, short |
2117 | 131,29 | Shift cable assy - transom mount, cam, long |
2118 | 174,33 | Impeller 6-79 cut back 6 3/4" for BM, w/sleeve 36.1 & 2 tee keys 1705 |
2119 | 46,65 | Liner 6" reduced height 5/8" for BM, with bolts & lockwashers |
2120 | 296,78 | Intake assy 6, reduced for model BM, with grill bars & liner |
2124 | 374,11 | Impeller 7 3/8 D stainless steel, 3 blade, w/sleeve 136 & 2 tee keys 1706 |
2126 | 232,47 | Driveshaft only AQ SHO, (see assy # 2127.1) |
2127,1 | 574,66 | Driveshaft assembled in bearing carrier AQ SHO |
2128 | 7,89 | Shaft roller - cam AQ SHO |
2128,1 | 24,99 | Offset assy AQ SHO cam |
2146 | 167,87 | Adapter plate, BP |
2152 | 232,47 | Driveshaft only BP, (see assy # 2153.1) |
2153,1 | 574,66 | Driveshaft assembled in bearing carrier BP |
2155 | 239,02 | Driveshaft only BPX, (see assy # 2156.1) |
2156,1 | 581,12 | Driveshaft assembled in bearing carrier BPX |
2157 | 3,99 | Shift rod guide BP |
2160 | 219,45 | Driveshaft only BHX, (see assy # 2161.1) |
2161,1 | 509,96 | Driveshaft assembled in bearing carrier BHX |
2163 | 232,47 | Driveshaft only AQX SHO, (see assy # 2164.1) |
2164,1 | 574,66 | Driveshaft assembled in bearing carrier AQX SHO |
2165 | 91,87 | Adapter plate, BQ |
2167 | 127,78 | Bearing carrier with seals, BQ |
2170 | 551,10 | Main housing with exhaust tube, BQ, no reverse gate |
2171 | 627,10 | Main housing with gate and linkage, BQ |
2173 | 134,33 | Driveshaft only BQ, (see assy # 2174) |
2174 | 327,37 | Driveshaft assembled in bearing carrier BQ |
2175 | 4,28 | Shift rod guide BQ |
2176 | 11,31 | Shift lever BQ |
2177 | 0,76 | Bushing BQ |
2178 | 81,89 | Shift cable assy BQ |
2179 | 50,16 | Water pump adapter BQ |
2180 | 15,01 | Cable end, Tohatsu, for 2014 tiller handle |
2182 | 232,47 | Driveshaft only Verado, (see assy # 2183.1) |
2183,1 | 574,66 | Driveshaft assembled in bearing carrier Verado |
2184 | 174,33 | Impeller 6 BQ CB, 3 blade, w/sleeve 36.1 & 2 tee keys 1705 |
2185 | 63,37 | Shift cable assy, Tohatsu tiller 2014, short |
2189 | 684,76 | Main housing with exhaust tube, BR, no reverse gate |
2190 | 812,06 | Main housing with gate and linkage, BR |
2191 | 423,99 | Impeller 7 7/8 stainless steel, 4 blade, w/sleeve 136 & 2 tee keys 1706 |
2192 | 64,70 | Liner flanged, 7 7/8 |
2194 | 232,47 | Driveshaft only Verado 225, (see assy # 2195.1) |
2195,1 | 574,66 | Driveshaft assembled in bearing carrier Verado 225 |
2200 | 176,04 | Driveshaft only BT50-4, (see assy # 2201) |
2201 | 354,54 | Driveshaft assembled in bearing carrier BT50-4 |
2202 | 147,06 | Adapter plate, BT50-4 |
2204 | 133,57 | Bearing carrier with seals, BT50-4 |
2207 | 578,65 | Main housing with exhaust tube, BT50-4, no reverse gate |
2208 | 673,84 | Main housing with gate and linkage, BT50-4 |
2209 | 63,37 | Shift cable assy Tohatsu 2014 long |
2210 | 3,99 | Shift rod guide BT50-4 |
2211 | 7,41 | Water tube extension, BT50-4 with #530 O ring |
2212 | 2,47 | Open eye routing ring BT50-4 |
2217 | 216,13 | Driveshaft only BR 90-115, (see assy # 2218.1) |
2218,1 | 506,54 | Driveshaft assembled in bearing carrier BR 90-115 |
2219 | 439,09 | Intake assy 7 7/8, with grill bars & flanged liner - specify color |
2220 | 373,54 | Impeller 7 3/16 stainless steel, 4 blade, w/sleeve 136 & 2 tee keys 1706 |
2221 | 55,01 | BI Couplilng kit |
10071 | 808,74 | Main housing with gate and linkage, AC |
11350 | 812,06 | Main housing with gate and linkage, AD |
11470 | 636,50 | Main housing with gate and linkage, AE |
11620 | 673,84 | Main housing with gate and linkage, AF |
12261 | 812,06 | Main housing with gate and linkage, AG |
19000 | 807,31 | Main housing with gate and linkage, L |
35700 | 654,46 | Main housing with gate and linkage, Q |
38500 | 808,74 | Main housing with gate and linkage, R |
40140 | 818,52 | Main housing with gate and linkage, S |
46100 | 814,06 | Main housing with gate and linkage, T |
81401 | 636,50 | Main housing with gate, V |
83900 | 812,06 | Main housing with gate and linkage, W |
89200 | 655,98 | Main housing with gate and linkage, U4 |
90200 | 673,84 | Main housing with gate and linkage, Z |
90800 | 812,06 | Main housing with gate and linkage, Y |
94100 | 818,52 | Main housing with gate and linkage, AA |
98000 | 673,84 | Main housing with gate and linkage, AB |